top of page

Our Home is Better For you

More Comfort For You

image.png
smart home 1.jpeg

Smart home

Through mobile you can switch on or off the AC, geyser, TV, light, fan etc. This way you can start your AC or geyser, before you reach. To make maintenance easy, this is part of our warranty.

Thermostatic valves in shower

In winters, use of thermostatic valves keep the temperature of hot water constant. So, no need to manually adjust the mixing of hot and cold water.

thermostatic valves.jpg
automation for water mototrs.jpg

Automation for water motors

We recommend and install automation of water motors in following ways:

  1. Motors to auto-start and auto-stop based on water levels or water supply;

  2. Water level indicator in kitchen

Heat reflective tiles on terrace

These tiles reflect the sun heat back, making the third floor less hot in summer and less cold in winters. Besides giving more comfort, it also saves you electricity bill.

heat reflective.jpg
biometric.jpg

Biometric locks

For flexible usage at the main door, biometric locks help. Besides a traditional key, they can also be operated through a fingerprint or pin.

More car parks

More car parks by designing structures in such a way that we get more or large column-free spaces.

thermostatic valves.jpg
smart home 1.jpeg

Independent car parks

It is a problem if the car park slots of one floor owner are dependent upon the car park slots of another floor owner. We try to design in such a way that we are able to give independent car parks. We can link the stilt design of a 200 sq yds here from HomeSimplified.

Door on mumty staircase

We recommend the door on mumty staircase to be of the same material as external doors and windows, as it is also exposed to water and sunlight. So, material should be aesthetic as well as able to withstand external weather.

door mumty staircase.jpg
provisioning inverter.jpg

Provisioning for inverter

As a default, we provision for all light, fan and 6 amp points on the inverter. In future, as per your requirement and inverter capacity, you can operate any light, fan or 6 amp point on the inverter, rather than the traditional model where only a few selected points are connected to the inverter.

Mosquito mesh in windows

All our sliding windows and doors inside home come with a mosquito mesh as a default standard option.

P traps.jpg

P-traps in the bathrooms

P-trap is in-built in a WC to stop foul smell. However, foul smells can also come from bathroom drains. So, we provide for a p-trap in that also.

4 layer overhead water tank

More layers provides better thermal insulation. So water will be less cold in winters and less hot in summers.

overhead tank.jpg
control valves.jpg

Control valves

In each vertical stack of water supply, a control valve is provided at the terrace. In case there is a water leakage in any bathroom or kitchen pipe, supply to the whole house is not cut.

Basement drainage

We provision for and provide two sump pumps in the basement. This way if one pump is out of order, then the second pump is immediately available.

basment drainage.jpg
factory made ash fly brick.jpg

Factory made cement and fly ash bricks

These bricks are better than traditionally used red bricks. Two key reasons are:

  1. Lower AC bills by up to 20% compared to red bricks as they have better thermal insulation

  2. More consistent size and strength as made in factory

Ceiling fans

We recommend use of new-generation BLDC fans which save up to Rs. 1,500 per fan per year in electricity bill. Also, they come with a remote control for speed control and make less noise.

ceiling fans.jpg
thermal insulation.jpg

Thermal insulation coatings

At terrace and external walls, we recommend a thermal insulation coat. This keeps your home less cold in winters and less hot in summers.

Ample number of sockets

We provide an ample number of 6 amp and 16 amp sockets across the various spaces in the home keeping in mind the potential uses that you may have while living.

ample number of sockets.jpg
door seal on ain door.jpg

Door seal on main door

Lizards, cockroaches and insects tend to enter our home from the gap between the main door and the floor below it. In our main doors, we install a door seal which covers that gap.

Cushion between door and frame

When door closes with some force, there is a noise of bang as it hits the frame. In the doors we provide, a rubber is installed on the frame which acts as a cushion.

cushion between door frame.jpg
occupancy sensors in stilt.jpg

Occupancy sensors in stilt

Lights installed in stilt ceiling are linked with occupancy sensors. So, when stilt is being used lights switch on automatically and switch off when stilt is not being used.

Basement Ventilation

Most basements do not have natural ventilation now. So, we provide exhaust fans in the basement for air exchange – one exhaust for bringing fresh air in and another for taking out basement air.

basement ventilation.jpg
MS ladder.jpg

MS ladder to access mumty

As a default standard, all our homes have a MS ladder mounted on the mumty wall to access the mumty.

Schedule a Meeting With Us

Prithu’s team is passionate about home-building journeys. Schedule a meeting with us to discuss your queries. We’d love to chat with you, with no obligations involved. Let us know whether you prefer an in-person or a video meeting. We’d be happy to assist you. 

 All images shown are the real photographs or renderings of our projects. Prithu Homes has the right to change any information anytime without prior intimation. Please check for the latest applicable details before the signing of the agreement. All features or aspects mentioned may not be part of the standard offering. The renders shown for this project are subject to change as we work on final concepts and drawings.

bottom of page